|
|
| ITEM
| WIRE COLOR
|POL| WIRE
LOCATION |
|
12V|red &
red/black |+
|ignition
harness
|
STARTER|yellow
|+ |ignition
harness
|
IGNITION|red/yellow
|+ |ignition
harness
|
ACCESSORY|red/blue
|+ |ignition
harness
| SECOND
ACCESSORY|red/white
|+ |ignition
harness
| POWER LOCK|blue/white *1
|- |doorlock timer above fusebox
| POWER UNLOCK|yellow or gry/blk *1|- |doorlock
timer above fusebox
| PARKING LIGHTS
+|brown/white
| |drivers kick
panel
| PARKING LIGHTS
-|white
| |headlight
switch
| DOOR
TRIGGER|white
|- |drivers kick
panel
| TRUNK/HATCH
PIN|pink/black
|- |drivers kick
panel
|
TACHOMETER|orange/black
| |ignition
coil
| BRAKE
WIRE|blue
|+ |brake
switch
|
MAKE DAEWOO MOD. LEGANZA YEAR 99 � PETROL
DIESEL
ALARM/SIREN
POSITION
Position the compact alarms and the sirens on the support of the shock absorber,
passenger�s side.
CENTRAL UNIT POSITION Position the modular systems and the modules under the
dashboard, driver�s side.
POWER SUPPLY + 30: connect to the 4 mm2 RED wire located at the entrance of the
fuse box.
- 31: connect with a cable terminal directly to the car body.
IGNITION WIRE + 15/54: connect to the PINK wire located in the wiring harness
under the sill cover,
driver�s side.
DIRECTION INDICATORS Connect to the LIGHT BLUE wire at the position nr. 4 and
BLUE wire with BLACK
references at the position nr. 5 located in the 6 ways white connector behind
the
driver�s side bulkhead.
ELECTRIC WINDOWS Positive control signal
Front window, driver�s side:
cut the ORANGE/BLACK wire located directly in the wiring harness outgoing from
the serial push botton.
Front window, passenger�s side:
cut the BROWN wire.
Rear window, driver�s side:
cut the GREEN wire.
Rear window, passenger�s side:
cut the LIGHT GREEN wire.
Connections must be done in the wiring harness coming out of the driver�s side
door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the LIGHT BLUE/WHITE wires with BLACK references (lock) and to the
YELLOW wire (unlock) located in the wiring harness behind the sill cover,
driver�s
side.
IMMOBILISATION POINT 1 Fuel pump
Cut the GREY wire with BLACK references located in the wiring harness behind the
sill cover, driver�s side.
STARTER +50: Cut the PINK/BLACK wire at the position nr. 9 in the line marked
"A" located
in a multiway connector, in the fuse box inside the engine compartment.
BONNET SWITCH Install an additional switch on the front headlamp support plate
near the rubber
grommet of the bonnet.
DOORS SWITCH Connect to the WHITE wire with BLACK references located in the
wiring harness
behind the sill cover, driver�s side.
BOOT SWITCH Connect to the 0,5 mm2 PINK/BLACK wire located in the wiring harness
behind the
sill cover, driver�s side.
|