HISENSE
=======
مشاركة للاخ فادي يحيى
بخصوص هدا النوع
HISENSE SERVICE MODE

LG/ LH
======
مشاركة للاخ zen1981
حول هدا النوع من اجهزة LCD

عندي سؤال حول شاشات LG LH هذه الموديلات لم اجد لها سرفيس مينو
مع علمي بغير موديل نضغط على زر المنيو في الريمونت ونبقى ضاغطين وبنفس الوقت نضغط على زرالمنيو الموجود بلوحة ازرار الشاشة
تظهر القائمة وان طلبت كلمة مرور فهي اربع أصفار
وشكرا

BenQ
=====
مشاركة للاخ فادي يحيى

Login Factory Service Mode: BenQ Lcd Monitor



a) The Older and latest version of BenQ LCD Monitor have diference method
to login factory service mode. The older version login method is: Press and hold the "MENU" & EXIT" button, then press "POWER" button to on the lcd monitor.



b) After on lcd monitor, you need to press "i" button, now you can login to their factory service mode.



c) We can look at the above photo, the early or older benq lcd monitor, they only have a little information on it. They just show the white balance functinon on factory service mode for adjustment only.



d) The new model of BenQ lcd monitor, their login factory service mode method are difference from the early model lcd monitor. Firstly, press The "POWER", "SELECT" and "MENU" button at the same time.
After on lcd monitor, press the "v" button, now you can login to the factory service mode.



e) The above photo is factory service mode for BenQ FP241WZ lcd monitor. Bottom of the photo have show out their manufacturer time and lcd panel part number.

sony bravia
======
دائما فادي يحيى

TOSHIBA
=====
مشارك للاخ العباسي

http://www.sendspace.com/file/r9mt6s

LG Lcd Monitor
==========
مشاركة للاخ فادي مرة اخرى
Before on the lcd monitor, you need to press and hold the "MENU" button, then press "POWER" to on the monitor. Press "MENU" button to open the osd menu, at the bottom of menu, you can see a new selection to go into the factory service mode.



a) Press and hold the "MENU" button, then on the monitor.



b) Now you need to press the "MENU" button, then you can login to factory service mode.



c) The LG LCD Monitor factory service mode screen shot. Inside the factory service mode, you got some useful information like, product model, manufacturer date, F-ENGINE chipset version, lcd panel number and etc.

Viewsonic LCD Monitor
============
فادي وبس




a) Before on lcd monitor, press and hold the "2" button then on the lcd monitor power.



b) After on lcd monitor, press "1" to open the osd menu.



c) Now, you can see bottom of the menu extra more one selection for "Factory Menu".



d) Press the "2" button, you can login to the factory service mode.


e) The information of Viewsonic LCD Monitor factory service mode.


Read more: http://www.qariya.com/vb/showthread....#ixzz1FflltuWe

Sony TV Service Menu Code
============
تشكر اخي فادي

Plasma / LCD / CRT / RPTV :

# Using the remote control:
# Turn the TV off.
# Press {DISPLAY} {5} {VOL+} {POWER ON} buttons.
or
Press {DISPLAY} {5} {POWER ON} buttons.
# The Service Menu will be displayed.
# Use numbers {1} and {4} to select the item to adjust.
# Use numbers {3} and {6} to adjust the value of the data.
# Press {MUTE} then {ENTER} to save new settings.
# The words "WRITE" in red will show up in the upper right corner if saved.
# Turn the TV off to exit the service menu.


PROJECTORS :

* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Service mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Factory Mode?".
* Any additional menus usually pop up under the main INFORMATION menu.


Service Menu Key Sequence:

* Access "Menu" and make sure "Status" is On.
* Exit the "Menu".

* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Service Mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Factory Mode
?".