|
:: مهندس متواجد ::
تاريخ التسجيل: Mar 2007
المشاركات: 90
|
|
نشاط [ tricka ]
قوة السمعة:
|
|
11-11-2015, 11:02 AM
المشاركة 491
|
|
Code Description Remedy
E000 The thermistor has an open circuit or a short circuit.
The heater has an open circuit.
The thermal fuse has blown.
The High-voltage power supply board has a fault.
The DCNT board has a fault. - Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the High-voltage power supply board.
- Replace the DCNT board.
E100 The scanner assembly has a fault. - Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.
E198 Flash ROM write error. - Turn the power OFF and then back ON.
- Replace the SCNT board.
E225 CIS lamp has a fault. - Turn the power OFF and then back ON.
- Replase the CIS unit.
E674 Modem error. - Turn the power OFF and then back ON.
- Replace the SCNT board.
|