int i;
int h;


void main()
 {
 trisa=0;
 porta=0;
 adcon1=6;
 TRISB=0;
 PORTB=0;
 trisd=0;
 portd=0;
 i=0;
 h=0;



     while(1){

              for(h=0;h<60;h++){
                                for(i=0;i<60;i++){
                                                  portb=dec2bcd(i);
                                                  porta.f0=~porta.f0;
                                                  delay_ms(1000);
                                                 }

            portd=dec2bcd(h);


         }

 
 }
}

int i,j,k ;
char dat[] = {192, 249,164,176,153,146,130,248,128,144};
sbit en1_7sec at RB0_bit;
sbit en2_7sec at RB1_bit;
#define segment     portd
void show_7seg(char kk);

void main() 
{
 ADCON1=0x0F;// disable anloge
trisd=0;
trisb=0;
segment=0xFF;// off 7seg
en1_7sec=0; //disenable 7seg
en2_7sec=0;//disenable 7seg
 while(1){
         for(i=0;i<=99;i++)show_7seg(i);
        }
}
//****************************************************
void show_7seg( char kk)
{
  for(j=0;j<70;j++)// wait
                      {
                       en1_7sec=1; en2_7sec=0; //enable 7seg first and disable 7seg second ,
                       segment = dat[kk/10];
                       delay_ms(5);
                       segment=0xFF; // off 7 seg
                       en1_7sec=0; en2_7sec=1;  //enable 7seg second and disable 7seg first ,
                       segment = dat[kk%10];
                       delay_ms(5);
                       segment=0xFF;//off 7 seg
                      }
}

#define segment         portb
char y=0,kk=0 ,old1,old2;
int x=0 , old=0;
 //char segment[]={192,249,164,176,153,146,130,248,128,144};
char seg[]={63,6,91,79,102,109,125,7,127,111};
void show_number();
void main()

{
 cmcon=7;// disable analoge

 trisb=0;
 trisa=0;

 if( eeprom_read(2)!=0xff ) {
                              old=(eeprom_read(2)*100)+EEPROM_Read(3) ;
                             }
  delay_ms(50);
  while(1)
    {                                                                                                                                                   //
      for( x=old ;x<=9999;x++)

           {
                show_number();
                old1=x/100;
                // store value in eeprom
                EEPROM_Write(2,old1); // x=1234/100 =12.34=12
                EEPROM_Write(3,x%100); //%100 =34
           }

     old=0;
    }
}

void show_number()
{
for( y=0; y<50;y++) // control of time by choising max value for y ;
    {
     porta.f0=0; porta.f1=1;porta.f2=1; porta.f3=1;
     segment=seg[x/1000];
     delay_ms(2);
     segment=0;
     //***********************************************//
     porta.f0=1; porta.f1=0;porta.f2=1; porta.f3=1;
     segment=seg[x%1000/100];
     delay_ms(2);
     segment=0;
    //********************************************//
    porta.f0=1; porta.f1=1;porta.f2=0; porta.f3=1;
     segment=seg[x%1000%100/10];
     delay_ms(2);
     segment=0;
     //******************************//
     porta.f0=1; porta.f1=1;porta.f2=1; porta.f3=0;
     segment=seg[x%1000%100%10];
    delay_ms(2);
    segment=0;

    }


}

void show_number()
{
for( y=0; y<50;y++) // control of time by choising max value for y ;
    {
     porta.f0=0; porta.f1=1;porta.f2=1; porta.f3=1;
     segment=seg[x/1000];
     delay_ms(2);
     segment=0;
     //***********************************************//
     porta.f0=1; porta.f1=0;porta.f2=1; porta.f3=1;
     segment=seg[(x/100)%10];
     delay_ms(2);
     segment=0;
    //********************************************//
    porta.f0=1; porta.f1=1;porta.f2=0; porta.f3=1;
     segment=seg[(x/10)%10];
     delay_ms(2);
     segment=0;
     //******************************//
     porta.f0=1; porta.f1=1;porta.f2=1; porta.f3=0;
     segment=seg[x%10];
    delay_ms(2);
    segment=0;

    }


}