#define       is              ==
#define       preseed         0
#define       sw1             porta.b0
#define       sw2             porta.b1
#define       sw3             porta.b2
#define       sw4             porta.b3
#define       sw5             porta.b4
#define       sw6             porta.b5
#define       sw1_dir         trisa.b0
#define       sw2_dir         trisa.b1
#define       sw3_dir         trisa.b2
#define       sw4_dir         trisa.b3
#define       sw5_dir         trisa.b4
#define       sw6_dir         trisa.b5
#define       on                1
#define       off               0
#define       input             1
#define       output            0
/*******************************************/
char code_1[]={0,0,0,0,1,0,1,0,0,1};
char code_2[]={0,0,0,0,1,0,1,0,1,1};
char code_3[]={0,0,0,0,1,0,1,1,0,1};
char code_4[]={0,0,0,0,1,0,1,1,1,1};
char code_5[]={0,0,0,0,1,1,0,0,0,1};
char code_6[]={0,0,0,0,1,1,0,0,1,1};
char x=0;
/*****************************************/
void send_code(char my_code[])
{
 for(x=0;x<10;x++)
                {
                 if(my_code[x] is 0){pwm1_start();}
                 if(my_code[x] is 1){pwm1_stop() ;}
                 delay_ms(20);
                 }
/*****************************************/
}
void init()
{trisa.b7=input;
 trisa.b5=input;
 sw1=input;
 sw2=input;
 sw3=input;
 sw4=input;
 sw5=input;
 sw6=input;
 trisb=0;
 portb=0;
 ANSEL=0;
 OSCCON= 0b01000000;  
 cmcon=7;
}

/*****************************************/
void main()
{
         init();
         pwm1_init(38000);
         pwm1_set_duty(178);
         while(1)
                {
                 if(sw1 is preseed)
                 {delay_ms(10);
                 while(sw1 is preseed);
                 delay_ms(10);
                 send_code(code_1);
                 }
 else  if(sw2 is preseed)
                    {
                     delay_ms(10);
                     while(sw2 is preseed);
                     delay_ms(10);
                     send_code(code_2);
                    }

  else  if(sw3 is preseed)
                  {
                   delay_ms(10);
                   while(sw3 is preseed);
                   delay_ms(10);
                   send_code(code_3);

                  }
 else if(sw4 is preseed)
                   {
                    delay_ms(10);
                    while(sw4 is preseed);
                    delay_ms(10);
                    send_code(code_4);
}
else if(sw5 is preseed)
                   {
                    delay_ms(10);
                    while(sw5 is preseed);
                    delay_ms(10);
                    send_code(code_5);
                   }
else if(sw6 is preseed)
                   {
                     delay_ms(10);
                     while(sw6 is preseed);
                     delay_ms(10);
                     send_code(code_6);
                   }
  }
}

#define       is              ==
#define       preseed         0
#define       sw1             porta.b0
#define       sw2             porta.b1
#define       sw3             porta.b2
#define       sw4             porta.b3
#define       sw5             porta.b4
#define       sw6             porta.b5
#define       sw1_dir         trisa.b0
#define       sw2_dir         trisa.b1
#define       sw3_dir         trisa.b2
#define       sw4_dir         trisa.b3
#define       sw5_dir         trisa.b4
#define       sw6_dir         trisa.b5
#define       on                1
#define       off               0
#define       input             1
#define       output            0

}
void init()
{trisa.b7=input;
 trisa.b5=input;
 sw1=input;
 sw2=input;
 sw3=input;
 sw4=input;
 sw5=input;
 sw6=input;
 trisb=0;
 portb=0;
 ANSEL=0;
 OSCCON= 0b01000000;  
 cmcon=7;
}

#define       is              ==
#define       preseed         0
#define       sw1             porta.b0
#define       sw2             porta.b1
#define       sw3             porta.b2
#define       sw4             porta.b3
#define       sw5             porta.b4
#define       sw6             porta.b5
#define       sw1_dir         trisa.b0
#define       sw2_dir         trisa.b1
#define       sw3_dir         trisa.b2
#define       sw4_dir         trisa.b3
#define       sw5_dir         trisa.b4
#define       sw6_dir         trisa.b5
#define       on                1
#define       off               0
#define       input             1
#define       output            0

}
void init()
{trisa.b7=input;
 trisa.b5=input;
 sw1=input;
 sw2=input;
 sw3=input;
 sw4=input;
 sw5=input;
 sw6=input;
 trisb=0;
 portb=0;
 ANSEL=0;
 OSCCON= 0b01000000;  
 cmcon=7;
}