sbit LCD_RS at Rd2_bit;
sbit LCD_EN at Rd3_bit;
sbit LCD_D4 at Rd4_bit;
sbit LCD_D5 at Rd5_bit;
sbit LCD_D6 at Rd6_bit;
sbit LCD_D7 at Rd7_bit;

sbit LCD_RS_Direction at TRISd2_bit;
sbit LCD_EN_Direction at TRISd3_bit;
sbit LCD_D4_Direction at TRISd4_bit;
sbit LCD_D5_Direction at TRISd5_bit;
sbit LCD_D6_Direction at TRISd6_bit;
sbit LCD_D7_Direction at TRISd7_bit;
float x=0.00;
float y[12];
void interrupt()
{
x+=0.1;
intcon.f1=0;
}
void main()
{
trisc=0;PORTc=0;trisb.f0=1;
lcd_init();
lcd_cmd(_LCD_CURSOR_OFF);

while(1){
intcon=0b10010000;
delay_ms(9902);
FloatToStr(x,y);
lcd_out(1,2,y);
lcd_out_cp("    Hz");

intcon=0;



}

}

sbit LCD_RS at RC4_bit;
sbit LCD_EN at RC5_bit;
sbit LCD_D4 at RC0_bit;
sbit LCD_D5 at RC1_bit;
sbit LCD_D6 at RC2_bit;
sbit LCD_D7 at RC3_bit;
sbit LCD_RS_Direction at TRISC4_bit;
sbit LCD_EN_Direction at TRISC5_bit;
sbit LCD_D4_Direction at TRISC0_bit;
sbit LCD_D5_Direction at TRISC1_bit;
sbit LCD_D6_Direction at TRISC2_bit;
sbit LCD_D7_Direction at TRISC3_bit;
// End LCD module connections
// Define Messages

char message1[] = "F=      Hz";
char *freq = "00.0";
//float freq=0.00;
//float y[12];
void Display_Freq(unsigned int freq2write) {

 freq[0] =  (freq2write/10)%10 + 48;    // Extract tens digit
 freq[1] =   freq2write%10     + 48;    // Extract ones digit
 // Display Frequency on LCD
  
 //FloatToStr(freq,y);
 //lcd_out(1,5,y);
 
  Lcd_Out(1, 5, freq);
}
void main() {

 CMCON0 = 0x07;    // Disable Comparators
 ANSEL = 0x00;     // Disable analog channels
 TRISC = 0x00;     // PORTC O/P
 TRISA = 0b00001100; // RA2/T0CKI input, RA3 is I/P only
 OPTION_REG = 0b00101000; // Prescaler (1:1), TOCS =1 for counter mode
 Lcd_Init();                 // Initialize LCD
 Lcd_Cmd(_LCD_CLEAR);        // CLEAR display
 Lcd_Cmd(_LCD_CURSOR_OFF);   // Cursor off
 Lcd_Out(1,1,(message1));      // Write message1 in 1st row
 do {

  TMR0=0;
  Delay_ms(1000);  // Delay 1 Sec
  Display_Freq(TMR0);
 } while(1);  // Infinite loop
}