const  ctext[] = "mikroElektronika";
...
Glcd_Write_Const_Text_Adv(ctext, 0, 0);

 //Declarations------------------------------------------------------------------
const code char truck_bmp[1024];
//--------------------------------------------------------------end-declarations

// Glcd module connections
char GLCD_DataPort at PORTD;

sbit GLCD_CS1 at RB0_bit;
sbit GLCD_CS2 at RB1_bit;
sbit GLCD_RS  at RB2_bit;
sbit GLCD_RW  at RB3_bit;
sbit GLCD_EN  at RB4_bit;
sbit GLCD_RST at RB5_bit;

sbit GLCD_CS1_Direction at TRISB0_bit;
sbit GLCD_CS2_Direction at TRISB1_bit;
sbit GLCD_RS_Direction  at TRISB2_bit;
sbit GLCD_RW_Direction  at TRISB3_bit;
sbit GLCD_EN_Direction  at TRISB4_bit;
sbit GLCD_RST_Direction at TRISB5_bit;
// End Glcd module connections

void delay2S(){                                  // 2 seconds delay function
  Delay_ms(2000);
}

void main() {                       
  unsigned short ii;
  char *someText;

  #define COMPLETE_EXAMPLE                       // comment this line to make simpler/smaller example
  ANSEL  = 0;                                    // Configure AN pins as digital
  ANSELH = 0;
  C1ON_bit = 0;                                  // Disable comparators
  C2ON_bit = 0;

  Glcd_Init();                                   // Initialize GLCD
  Glcd_Fill(0x00);                               // Clear GLCD

  while(1) {
    #ifdef COMPLETE_EXAMPLE
      Glcd_Image(truck_bmp);                     // Draw image
      delay2S(); delay2S();
    #endif
    
    Glcd_Fill(0x00);                             // Clear GLCD

    Glcd_Box(62,40,124,56,1);                    // Draw box
    Glcd_Rectangle(5,5,84,35,1);                 // Draw rectangle
    Glcd_Line(0, 0, 127, 63, 1);                 // Draw line
    delay2S();

    for(ii = 5; ii < 60; ii+=5 ){                // Draw horizontal and vertical lines
      Delay_ms(250);
      Glcd_V_Line(2, 54, ii, 1);
      Glcd_H_Line(2, 120, ii, 1);
    }

    delay2S();

    Glcd_Fill(0x00);                                       // Clear GLCD
    #ifdef COMPLETE_EXAMPLE
      Glcd_Set_Font(Font_Glcd_Character8x7, 8, 7, 32);     // Choose font, see __Lib_GLCDFonts.c in Uses folder
    #endif
    Glcd_Write_Text("mikroE", 1, 7, 2);                    // Write string

    for (ii = 1; ii <= 10; ii++)                           // Draw circles
      Glcd_Circle(63,32, 3*ii, 1);
    delay2S();

    Glcd_Box(12,20, 70,57, 2);                             // Draw box
    delay2S();
    
    #ifdef COMPLETE_EXAMPLE
      Glcd_Fill(0xFF);                                     // Fill GLCD

      Glcd_Set_Font(Font_Glcd_Character8x7, 8, 7, 32);     // Change font
      someText = "8x7 Font";
      Glcd_Write_Text(someText, 5, 0, 2);                  // Write string
      delay2S();

      Glcd_Set_Font(Font_Glcd_System3x5, 3, 5, 32);        // Change font
      someText = "3X5 CAPITALS ONLY";
      Glcd_Write_Text(someText, 60, 2, 2);                 // Write string
      delay2S();

      Glcd_Set_Font(Font_Glcd_System5x7, 5, 7, 32);        // Change font
      someText = "5x7 Font";
      Glcd_Write_Text(someText, 5, 4, 2);                  // Write string
      delay2S();

      Glcd_Set_Font(Font_Glcd_5x7, 5, 7, 32);              // Change font
      someText = "5x7 Font (v2)";
      Glcd_Write_Text(someText, 50, 6, 2);                 // Write string
      delay2S();
    #endif
  }
}