void show_7seg(unsigned int number,char time)
{
 for(x=0;x<time;x++)
     {
      seg_en1=enable;     seg_en2=disenable;
      seg_en3=disenable; seg_en4=disenable;
      segment=segment1[number/100];
      delay_ms(2);
      segment=0;// OFF 7 segment

       seg_en4=disenable;    seg_en3=disenable;
      seg_en2=enable;        seg_en1=disenable;
      segment=segment1[(number%100)/10];
      delay_ms(2);
      segment=0;// OFF 7 segment

       seg_en4=disenable;    seg_en3=enable;
      seg_en2=disenable;     seg_en1=disenable;
      segment=segment1[number%100%10];
      delay_ms(2);
      segment=0;// OFF 7 segment

      //**** show C in 7 seg  ***//
      seg_en1=disenable;    seg_en2=disenable;
      seg_en3=disenable;     seg_en4=enable;
      segment=segment1[10];
      delay_ms(2);
      segment=0;// OFF 7 segment

     }

 seg_en1=enable;     seg_en2=disenable;
      seg_en3=disenable; seg_en4=disenable;
      segment=segment1[number/100];
      delay_ms(2);
      segment=0;// OFF 7 segment

 seg_en4=disenable;    seg_en3=disenable;
      seg_en2=enable;        seg_en1=disenable;
      segment=segment1[(number%100)/10];
      delay_ms(2);
      segment=0;// OFF 7 segment

 seg_en4=disenable;    seg_en3=enable;
      seg_en2=disenable;     seg_en1=disenable;
      segment=segment1[number%100%10];
      delay_ms(2);
      segment=0;// OFF 7 segment

seg_en1=disenable;    seg_en2=disenable;
      seg_en3=disenable;     seg_en4=enable;
      segment=segment1[10];
      delay_ms(2);
      segment=0;// OFF 7 segment

seg_en1=disenable;    seg_en2=disenable;
      seg_en3=disenable;     seg_en4=enable;
      segment=segment1[10];
      delay_ms(2);
      segment=0;// OFF 7 segment

void show_7seg(unsigned int number,char time)
{
 for(x=0;x<time;x++)
     {
      seg_en1=enable;     seg_en2=disenable;
      seg_en3=disenable; seg_en4=disenable;
      segment=segment1[number/100];
      delay_us(250);
      segment=0;// OFF 7 segment

      seg_en4=disenable;    seg_en3=disenable;
      seg_en2=enable;        seg_en1=disenable;
      segment=segment1[(number%100)/10];
      delay_us(250);
      segment=0;// OFF 7 segment

       seg_en4=disenable;    seg_en3=enable;
      seg_en2=disenable;     seg_en1=disenable;
      segment=segment1[number%100%10];
      delay_us(250);
      segment=0;// OFF 7 segment

      //**** show C in 7 seg  ***//
      seg_en1=disenable;    seg_en2=disenable;
      seg_en3=disenable;     seg_en4=enable;
      segment=segment1[10];
      delay_us(250);
      segment=0;// OFF 7 segment

     }

void caculated_temperature()
{
 temp=ADC_Read(4);
 temp=temp*5000/1023;
 zz=(1/ (log( ( temp*(R1+R2)-(5000*R2) )/((5000-temp)*R25))/B +3.354e-3) )-273.15; // equation fot NTC
 temp2=zz;
 if(zz>=100)temp2=99; // max value beacuse using 7seg two segment only
 if(zz<=1)temp2=0;
 show_7seg(temp2,100);
}

void load()
{
 caculated_temperature();
 if(temp2>=EEPROM_Read(3))// run
    {
     led_load=on;
     led_alarm=off;
     k=1;
    }
 if(temp2>=(EEPROM_Read(3)-5)&& k is 0) // alarm
    {
     led_load=off;
     led_alarm=on;
    }
  if(temp2<=eeprom_read(0) && k is 1) { k=0;led_load=off;}
  if(temp2 is 75 && stop1 is 0) tone1(1);
  else if(temp2<75 || temp2>=76)stop1=0;
  if(temp2 >= 95 && stop2 is 0 ) tone1(2);
  else if(temp2<95)stop2=0;
}

void load()
{
 caculated_temperature();
 if(temp2>=tmax)// run
    {
     led_load=on;
     led_alarm=off;
     k=1;
    }
 if(temp2>=(tmax-5)&& k is 0) // alarm
    {
     led_load=off;
     led_alarm=on;
    }
  if(temp2<=tmin && k is 1) { k=0;led_load=off;}
  if(temp2 is 75 && stop1 is 0) tone1(1);
  else if(temp2<75 || temp2>=76)stop1=0;
  if(temp2 >= 95 && stop2 is 0 ) tone1(2);
  else if(temp2<95)stop2=0;
}

void init()
{
 anselh=0;//  portb is digital
 ansel=32;//RA5_bit is digital
    ///  output////
 segment_dir=output;
 seg_en1_dir=seg_en2_dir=output;
 seg_en3_dir=seg_en4_dir=output;
 led_Tmax_dir=led_Tmin_dir=output;
 led_load_dir=led_alarm_dir=output;
      //  input //
 sw_Tinc_dir=sw_Tdec_dir=sw_setting_dir=input;
     //  off all output//
 segment=0;// off 7seg
 led_Tmax=led_Tmin=off;
 led_load=led_alarm=off;
 seg_en1=seg_en2=seg_en3_dir=seg_en4_dir=disenable ;
 adc_Init();
 Sound_Init(&portb,7);
 if(eeprom_read(0)>100)eeprom_write(0,20);
 if(eeprom_read(3)>100)eeprom_write(3,25);
 tmin=eeprom_read(0);
 tmax=eeprom_read(3);
}

void load()
{
 caculated_temperature();
 if(temp2>=tmax)// run
    {
     led_load=on;
     led_alarm=off;
     k=1;
    }
 if(temp2>=(tmax-5)&& k is 0) // alarm
    {
     led_load=off;
     led_alarm=on;
    }
  if(temp2<=tmin && k is 1) { k=0;led_load=off;}
  if(temp2 is 75 && stop1 is 0) tone1(1);
  else if(temp2<75 || temp2>=76)stop1=0;
  if(temp2 >= 95 && stop2 is 0 ) tone1(2);
  else if(temp2<95)stop2=0;
}