sbit LCD_RS at RC4_bit;
sbit LCD_EN at RC5_bit;
sbit LCD_D4 at RC0_bit;
sbit LCD_D5 at RC1_bit;
sbit LCD_D6 at RC2_bit;
sbit LCD_D7 at RC3_bit;
sbit LCD_RS_Direction at TRISC4_bit;
sbit LCD_EN_Direction at TRISC5_bit;
sbit LCD_D4_Direction at TRISC0_bit;
sbit LCD_D5_Direction at TRISC1_bit;
sbit LCD_D6_Direction at TRISC2_bit;
sbit LCD_D7_Direction at TRISC3_bit;
// End LCD module connections
// Define Messages

char message1[] = "F=      Hz";
char *freq = "00";
void Display_Freq(unsigned int freq2write) {

 freq[0] = (freq2write/10)%10 + 48;    // Extract tens digit
 freq[1] =  freq2write%10     + 48;    // Extract ones digit
 // Display Frequency on LCD
 Lcd_Out(1, 5, freq);
}
void main() {

 CMCON0 = 0x07;    // Disable Comparators
 ANSEL = 0x00;     // Disable analog channels
 TRISC = 0x00;     // PORTC O/P
 TRISA = 0b00001100; // RA2/T0CKI input, RA3 is I/P only
 OPTION_REG = 0b00101000; // Prescaler (1:1), TOCS =1 for counter mode
 Lcd_Init();                 // Initialize LCD
 Lcd_Cmd(_LCD_CLEAR);        // CLEAR display
 Lcd_Cmd(_LCD_CURSOR_OFF);   // Cursor off
 Lcd_Out(1,1,message1);      // Write message1 in 1st row
 do {

  TMR0=0;
  Delay_ms(1000);  // Delay 1 Sec
  Display_Freq(TMR0);
 } while(1);  // Infinite loop
}