تحياتي للجميع تيسيرا علي الاخوة الفنيين والاعضاء
اطرح عليكم طريقة ادخال الكود لمعظم الموديلات وسناخذ الموضوع حسب الحروف الابجدية وسنبدا بجهاز Alpine

توكلنا عليالله

Alpine 1310R


Alpine 1310R Code Entry Instructions

After switching on 'CODE' will be displayed.

Press [ D.A.P/INTRO ] and '0000' will now be displayed.

Press [ A.P.I ] to increment the first digit or [ T.INFO ] to decrement, followed by pressing [ SCAN ] to move to the next digit or [ M.I.X ] to revert back. Follow this procedure to enter the remaining digits.

After the final digit press the [ TUNER / BAND ] button to accept

The set should now operate
---------------------------------------------
--------------------------------------

Alpine 7983R


Alpine 7983R Code Entry Instructions


Press the [ PWR ] and 'CODE' will be displayed.

Then press [ FUNC ] and '0000' will now be displayed.

Press [ ^ ] to increment the first digit followed by pressing [ UP > ]
Press [ ^ ] to increment the second digit followed by pressing [ UP > ]
Press [ ^ ] to increment the third digit followed by pressing [ UP > ]
Press [ ^ ] to increment the fourth digit

Press the [ TUNER / BAND ] button to accept

The set should now operate


----------------------------------
--------------------------

Alpine MF2197



Alpine MF2197 Mercedes Code Entry Instructions


After switching on the unit the display will show 'CODE' the 'C' will be flashing

Enter the code directly by using the station pre-sets 1 - 6

Followed by pressing the [ SC ] key to accept.

------------------------------------------------------------
--------------------------------------------------

Alpine MF2910


Alpine MF2910 Mercedes Code Entry Instructions


After switching on the unit the display shows 'CODE' with the 'C' flashing.

Turn the { RIGHT HAND CHANNEL SELECTOR CONTROL ] clockwise until the display changes to '1 - - - -'

Enter the code using the [ RIGHT HAND CHANNEL SELECTOR CONTROL] selecting the number then pressing the control in to enter, follow this process for the remaining digits.

On the last digit press and hold the control in for a few seconds, the code will then be accepted




----------------------------------------
-----------------------------

Alpine XQD101042



Alpine XQD101042 Code Entry Instructions


After switching on the set the display will show 'RANGE ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on


-----------------------------------------------
----------------------------------

Alpine XQD101430 Code Entry Instructions

After switching on the set the display will show 'LAND ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

---------------------------------------------------------------
----------------------------------------
Alpine 7286L

After switching on the unit the display shows 'CODE' which will be flashing

Press pre-set [ 1 ] and the display will show ' 000 0'

Press preset [ DX ] repeatedly for the first digit
Press preset [ 1 ] repeatedly for the second digit
Press preset [ 2 ] repeatedly for the third digit
Press preset [ 3 ] repeatedly for the third digit

Followed by pressing [BAND] button to enter

Re-enter the code as conformation and the set will switch on..

---------------------------------------------------------------------
-------------------------------------------------

Alpine 932 Alfa Romeo

Alpine 932 Alfa Romeo Code Entry Instructions

After switching the on unit the display will show ' CODE '

Enter the digit directly using the station pre-set keys

Once the last digit has been entered the set will switch on

-------------------------------------------------------------------------
---------------------------------------------------------
Alpine MF2199

After switching on the unit the display shows 'CODE' with the 'C' flashing.

Turn the { RIGHT HAND CHANNEL SELECTOR CONTROL ] clockwise until the display changes to '1 - - - -'

Enter the code using the [ RIGHT HAND CHANNEL SELECTOR CONTROL] selecting the number then pressing the control in to enter, follow this process for the remaining digits.

On the last digit press and hold the control in for a few seconds, the code will then be accepted

-------------------------------------------------------------------------
-----------------------------------------------------
Alpine R40

After switching on the set the display will show 'ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

----------------------------------------------------------------------------------
----------------------------------------------------------

Alpine XQD101043

After switching on the set the display will show 'ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

-----------------------------------------------------------------------------
--------------------------------------------------------
Alpine XQD101550

After switching on the set the display will show 'RANGE ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

---------------------------------------------------------------------------
--------------------------------------------------------------

Alpine 7982R

Press the [ PWR ] and 'CODE' will be displayed.

Then press [ FUNC ] and '0000' will now be displayed.

Press [ ^ ] to increment the first digit followed by pressing [ UP > ]
Press [ ^ ] to increment the second digit followed by pressing [ UP > ]
Press [ ^ ] to increment the third digit followed by pressing [ UP > ]
Press [ ^ ] to increment the fourth digit

Press the [ TUNER / BAND ] button to accept

The set should now operate

-----------------------------------------------------------------------
---------------------------------------------------
Alpine CM839RO

After switching on the set the display will show ' CODE '

Enter the code directly using the station pre-set keys 1 - 6

The set will now operate
--------------------------------------------------------------------------
---------------------------------------------------

After switching on the unit the display shows 'CODE' with the 'C' flashing.

Turn the { RIGHT HAND CHANNEL SELECTOR CONTROL ] clockwise until the display changes to '1 - - - -'

Enter the code using the [ RIGHT HAND CHANNEL SELECTOR CONTROL] selecting the number then pressing the control in to enter, follow this process for the remaining digits.

On the last digit press and hold the control in for a few seconds, the code will then be accepted

-------------------------------------------------------------------------------------
-------------------------------------------------------------------------

After switching on the set the display will show 'ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

------------------------------------------------------------------------------
---------------------------------------------------------------------

After switching on the set the display will show 'LAND ROVER' followed by 'CODE'

Press pre-set [ 1 ] and '0' will be displayed.

Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit

After the last digit has been entered press [ 1 ] to accept

The radio will switch on

تمت بحمد الله
والي اللقاء في ماركة اخري ان شاء الله
خالص تحياتي

حبيب قلبى مهندسنا القدير
احمد بيكو
دائما متميز ومتجدد
موضوع غايه فى الاهميه
مثبت لاهمية الموضوع

اقتباس المشاركة الأصلية كتبت بواسطة ahmed beco Alpine XQD101043 Alpine XQD101043 Code Entry Instructions After switching on the set the display will show 'ROVER' followed by 'CODE' Press pre-set [ 1 ] and '0' will be displayed. Enter the first digit using the [ < > ] keys to increment/decrement the code digit Enter the second digit using the [ < > ] keys to increment/decrement the code digit Enter the third digit using the [ < > ] keys to increment/decrement the code digit Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit After the last digit has been entered press [ 1 ] to accept The radio will switch on ----------------------------------------------------------------------------- -------------------------------------------------------- Alpine XQD101550 Alpine XQD101550 Code Entry Instructions After switching on the set the display will show 'RANGE ROVER' followed by 'CODE' Press pre-set [ 1 ] and '0' will be displayed. Enter the first digit using the [ < > ] keys to increment/decrement the code digit Enter the second digit using the [ < > ] keys to increment/decrement the code digit Enter the third digit using the [ < > ] keys to increment/decrement the code digit Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit After the last digit has been entered press [ 1 ] to accept The radio will switch on --------------------------------------------------------------------------- -------------------------------------------------------------- Alpine 7982R Alpine 7982R Code Entry Instructions Press the [ PWR ] and 'CODE' will be displayed. Then press [ FUNC ] and '0000' will now be displayed. Press [ ^ ] to increment the first digit followed by pressing [ UP > ] Press [ ^ ] to increment the second digit followed by pressing [ UP > ] Press [ ^ ] to increment the third digit followed by pressing [ UP > ] Press [ ^ ] to increment the fourth digit Press the [ TUNER / BAND ] button to accept The set should now operate ----------------------------------------------------------------------- --------------------------------------------------- Alpine CM839RO Alpine CM839RO Code Entry Instructions After switching on the set the display will show ' CODE ' Enter the code directly using the station pre-set keys 1 - 6 The set will now operate -------------------------------------------------------------------------- --------------------------------------------------- Alpine MF2297 Alpine MF2297 Code Entry Instructions After switching on the unit the display shows 'CODE' with the 'C' flashing. Turn the { RIGHT HAND CHANNEL SELECTOR CONTROL ] clockwise until the display changes to '1 - - - -' Enter the code using the [ RIGHT HAND CHANNEL SELECTOR CONTROL] selecting the number then pressing the control in to enter, follow this process for the remaining digits. On the last digit press and hold the control in for a few seconds, the code will then be accepted ------------------------------------------------------------------------------------- ------------------------------------------------------------------------- Alpine XQD000110 Alpine XQD000110 Code Entry Instructions After switching on the set the display will show 'ROVER' followed by 'CODE' Press pre-set [ 1 ] and '0' will be displayed. Enter the first digit using the [ < > ] keys to increment/decrement the code digit Enter the second digit using the [ < > ] keys to increment/decrement the code digit Enter the third digit using the [ < > ] keys to increment/decrement the code digit Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit After the last digit has been entered press [ 1 ] to accept The radio will switch on ------------------------------------------------------------------------------ --------------------------------------------------------------------- Alpine XQD101390 Alpine XQD101390 Code Entry Instructions After switching on the set the display will show 'LAND ROVER' followed by 'CODE' Press pre-set [ 1 ] and '0' will be displayed. Enter the first digit using the [ < > ] keys to increment/decrement the code digit Enter the second digit using the [ < > ] keys to increment/decrement the code digit Enter the third digit using the [ < > ] keys to increment/decrement the code digit Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit After the last digit has been entered press [ 1 ] to accept The radio will switch on تمت بحمد الله والي اللقاء في ماركة اخري ان شاء الله خالص تحياتي اخوكم احمد بيكو