Alpine XQD101043
Alpine XQD101043 Code Entry Instructions
After switching on the set the display will show 'ROVER' followed by 'CODE'
Press pre-set [ 1 ] and '0' will be displayed.
Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit
After the last digit has been entered press [ 1 ] to accept
The radio will switch on
-----------------------------------------------------------------------------
--------------------------------------------------------
Alpine XQD101550
Alpine XQD101550 Code Entry Instructions
After switching on the set the display will show 'RANGE ROVER' followed by 'CODE'
Press pre-set [ 1 ] and '0' will be displayed.
Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit
After the last digit has been entered press [ 1 ] to accept
The radio will switch on
---------------------------------------------------------------------------
--------------------------------------------------------------
Alpine 7982R
Alpine 7982R Code Entry Instructions
Press the [ PWR ] and 'CODE' will be displayed.
Then press [ FUNC ] and '0000' will now be displayed.
Press [ ^ ] to increment the first digit followed by pressing [ UP > ]
Press [ ^ ] to increment the second digit followed by pressing [ UP > ]
Press [ ^ ] to increment the third digit followed by pressing [ UP > ]
Press [ ^ ] to increment the fourth digit
Press the [ TUNER / BAND ] button to accept
The set should now operate
-----------------------------------------------------------------------
---------------------------------------------------
Alpine CM839RO
Alpine CM839RO Code Entry Instructions
After switching on the set the display will show ' CODE '
Enter the code directly using the station pre-set keys 1 - 6
The set will now operate
--------------------------------------------------------------------------
---------------------------------------------------
Alpine MF2297
Alpine MF2297 Code Entry Instructions
After switching on the unit the display shows 'CODE' with the 'C' flashing.
Turn the { RIGHT HAND CHANNEL SELECTOR CONTROL ] clockwise until the display changes to '1 - - - -'
Enter the code using the [ RIGHT HAND CHANNEL SELECTOR CONTROL] selecting the number then pressing the control in to enter, follow this process for the remaining digits.
On the last digit press and hold the control in for a few seconds, the code will then be accepted
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------
Alpine XQD000110
Alpine XQD000110 Code Entry Instructions
After switching on the set the display will show 'ROVER' followed by 'CODE'
Press pre-set [ 1 ] and '0' will be displayed.
Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit
After the last digit has been entered press [ 1 ] to accept
The radio will switch on
------------------------------------------------------------------------------
---------------------------------------------------------------------
Alpine XQD101390
Alpine XQD101390 Code Entry Instructions
After switching on the set the display will show 'LAND ROVER' followed by 'CODE'
Press pre-set [ 1 ] and '0' will be displayed.
Enter the first digit using the [ < > ] keys to increment/decrement the code digit
Enter the second digit using the [ < > ] keys to increment/decrement the code digit
Enter the third digit using the [ < > ] keys to increment/decrement the code digit
Enter the fourth digit using the [ < > ] keys to increment/decrement the code digit
After the last digit has been entered press [ 1 ] to accept
The radio will switch on
تمت بحمد الله
والي اللقاء في ماركة اخري ان شاء الله
خالص تحياتي
اخوكم احمد بيكو
طريقة ادخال الكود لاجهزة كاسيت السيارة Alpine
