الرجاء عمل ما يوجد في النص الانكليزي
My pixma IP1000 has messages "Waste Ink Full"
I try to reset with manual service mode :
- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button
After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem
Thank's
I've tried this one and success, thank you :-)
4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again
Here's the steps for reseting "Waste Ink Full" problem at iP1000
Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)
Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)
Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if you ever unpluging AC POWER cable. So try the 2nd method by using ServiceTool for IP1500
Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally
I tell you what. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink watse absorber overflow
فلاش طابعة CANON ip1000 PIXMA
