 |
:: عضو ذهبي ::
تاريخ التسجيل: Aug 2008
الدولة: www.Matrix219.com
المشاركات: 695
|
|
نشاط [ م/محمود ادريس ]
قوة السمعة:99
|
|
18-08-2009, 02:31 PM
المشاركة 1
|
|
P5S800-VM
90% من عيوب هذه البورده هي البايوس...
وعلشان كده قبل ما تشتغل فيها (لو مافيش عيب ظاهريه ) لازم تشحن بايوس الأول.
القصور في اصدارات البايوس كانت لعلاج التالي:
|
Fix 3DMark 03 sometimes fails
|
|
Fix chassis intrusion bug
|
|
Fix compatibility issue when using some AGP Card sometimes
|
1. Support CPU Q_Fan.
2. Fix CPU Temperature shown in BIOS Setup higher than the actual.
3. Fix can't find 3rd Boot Device if 2nd Boot Device removed.
4. Fix 3DMark2001 fail.
5. Patch for system reboot after resume from S3.
6. Fix show 3rd COM Ports in Device Manager.
7. Fix can press DEL to enter BIOS Setup during resume from S4
|
1.Support entering BIOS Setup during resume from S4
2.Turn off Power LED in S3
3.Fix can't boot to OS when insert the USB HD for the first time in RAID mode.
4.Update Onboard VGA BIOS
5.Support beep for VGA found
|
1. Add more ratio options down to 20% to item "CPU Fan Ratio".
2. Patch WHQL failure with some VGA cards.
3. Support new CPUs. Please refer to our website at: http://www.asus.com.tw/support/cpusu...pusupport.aspx
4. Fix Intel P4 64Bit CPUs can not install Windows XP 64Bit operating system.
5. Fix system under Windows 98SE resumes from S3 standby mode without display.
6. Patch system fails to boot from multi-section bootable CD.
|
1. Fix can't use Ghost 2003 on SATA HDD
2. Fix that it will auto resume from s4 in WinMe when inserting a usb device.
3. Support SATA IDE Mode (Native Mode)
4. Set OnChip SATA Mode default value at RAID mode.
5. Patch Install windowxp will fail when use Synnex memory .
6. Change Chassis Fan and Power Fan Low Speed Warning Limit to 800rpm
7. Change CPU Fan Low Speed Warning Limit to 1200rpm
|
1. Fix HCT test problems
2. Fix SATA HD in Native doesn't support DMA mode before installing driver
|
1. Change CPU Fan Low Limit to 800rpm
2. Fix HCT CPU may test fail with 6XX CPU
|
|
1. Fix sometimes there may be some problem in BIOS recovery
|
|
1. Fix that it can't install Windows with Intel 6XX CPU and NV 9400 AGP
|
1- Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
2- Fix sometimes it shows chassis intrude warning on POST Screen after clear CMOS.
3- Update Onboard VGA BIOS to Version 2.43.00
4- Update Bios to avoid the system BIOS being downgraded.
5- Fix can't set Onboard VGA share memory size as half of total main memory size
6- Add item"AI Overclock Tuner" & item "Spread Specturm" in the BIOS Setup
7- Fix 3.33GHz CPU (FSB533) frequency ratio failed to set x25
8- Fix EIST can't be enabled while the CPU ratio is 1
|
1- Fixed error memory size information in "system information" in OS.
2- Fixed sysyem will hang while installing OS on SATA HD from LAN.
3- Hide Item "Hyper Threading Function" in the Bios if installed CPU cannot support.
4- Show "AMIBIOS(C)2006" on POST screen.
|
Add onboard VGA support for 1440x900 screen resolution.
Fix Tape Drive can't be recognized issue.
Fix ATI X1300 AGP VGA card display corruption issue.
|
|
P5S800-VM لماذا 20 اصدار بايوس
