السلام عليكم ورحمة الله وبركاتة
احب انا اعطي القرية الالكترونية وجميع اعضائها المميزين والرائعين هذه المشاركة وارجوا ان تنال اعجابكم وتفيدكم.
Below procedure for DVD region code free [ it is illegal to free code of DVD player be care full while sending to distributors]
DVS products Method I
As for a free code of standard DVD player, please follow the procedure with remote control.
1. press subtitle key (or repeat key) in No disc.
2. Press digit key in order (if a digit display on the screen, you must try it from the beginning step.)
if regional code is "2"
> Repeat → 3 8 7 6 7 → 9 (before 2001. Oct.) > Repeat → 5 7 5 3 8 → 9 (after 2001. Nov.)
> if regional code is " 3" > Repeat → 5 6 7 3 2 → 9
> if regional code is "4" > Repeat → 7 6 8 8 4 → 9
> if regional code is "5" > Repeat → 5 3 8 1 4 → 9
> if regional code is "6" > Repeat → 2 4 4 6 2 → 9
5 - 7 - 5 - 3 - 8
3. After pressing digit 8, you can see a digit X (your regional code).
At that time, you have to press a digit 9.
4. press "Subtitle" to confirm it.
5. it's over.
Method II
And as for a portable DVD player, there is a difference compared to the above method.
1. Press "repeat" key in No disc.
2. Press ▲, ▼, ▶, ◀ in order
3. Press "repeat A-B" key.
If regional code display on the screen, press "repeat A-B" key after selecting a number "9".
والسلام عليكم ورحمة الله وبركاته
● type1 :
No Disc - repeat - ▲ - ▼ - ▶ - ▼
at that time, press "▼ " once more.
it will display digit "2" and change a digit whenever "▼ " presses.
you select digit "9" and press "repeat A-B".
● type2 :
No Disc - repeat - ▲ - ▼ - ▶ - ▼
at that time, press "repeat A-B ".
it will be changed from orignal digit to "9".
BLUE TECH Products Method
ENTER>8-4-2-6-9->ENTER…………
in order to reset your DVD player, press "stop" and "play" button at the same time during 5~10 seconds.
if this method doesn't work correctly, press "FF" and "REW" button at the same time during 5~10 seconds.
Solution : How to Playing back an VCD.
>Just delete Location No XD11(1SS355) of Front PCB in status of " POWER OFF"
1) Main u-com reset
> press the STOP button during 7 second in status of standby.
" standby RED LED in the twinkling "
2) MPEG reset.
> Press the STOP button during 7 second in status of " NO DISC"
" initial mode > Auto shut down"
Kindly refer to the below procedure for the Region Free of DVD-R121
Make the Unit in No disc Condition
Press repeat 3 - 8 - 7 - 6 - 7 display will show 2 make it 9
Open and close the Tray
Finish
Kindly refer to the below procedure for the Region Free of DVD-L75
Make the Unit in No disc Condition
Press repeat - Up - Down - Right - Left - Arrow button through Remote Control
Display will show 2 make it 9
Open and close the Tray
Finish
DVD-VR 320
1.Switch "ON" (no disc condition)
2.Press "Menu" button
3.Press "Subtitle" button
4.Enter 53814
5.You can see the "5", Pls change "5" to "9"
6.Open tray and Close tray using Open/Close button
7.Switch "Off"
8.Finish
Kindly refer to the below procedure for the Region Free of DVD-VR320
Make the Unit in No disc Condition
Press the Menu through Remote Control
Press 5 – 7 – 5 – 3 – 8 ------- Key button in order through Remote Control.
The Display will show 2 which has to be changed to 9 by pressing the arrow button
Open the Tray and Put the Disc close the disc
Automatically the tray will open, remove the disc and power off through remote
Switch off the Unit
Kindly refer to the below procedure for the Region Free of DVD-R130
Make the Unit in No disc Condition
Press the Menu through Remote Control
Press 5 – 7 – 5 – 3 – 8 ------- Key button in order through Remote Control.
The Display will show 2 which has to be changed to 9 by pressing the arrow button
Open and Close the Tray of the Unit
Switch off the Unit
Finish
Dealers Lock
Samsung Home Theater Systems have a Dealer Lock Function that prevents the disc tray from being opened. When the Dealer Lock Function is on, the display shows the word Locked.
Our Home Theater Systems have a Dealer Lock or Tray Lock Function that prevents the disc tray from being opened.
There are three procedures for turning off the Dealer Lock function. Try one, then the other, to see which works on your system.
Unlocking Procedure 1
To turn off the Dealer Lock function, follow these steps:
1. Turn on your Home Theater System.
2. Press the Stop button on the front panel and the Power button on the remote control simultaneously for four seconds.
Note: Repeating the two steps above turns the dealer lock on again.
Unlocking Procedure 2
To turn off the Dealer Lock function, follow these steps
1. Turn on your Home Theater System.
2. Press and hold the Function button on the front panel for 3 seconds. The display shows the word Unlock.
Note: Repeating the two steps above turns the dealer lock on again.
Unlocking Procedure 3
To turn off the Dealer Lock function, follow these steps
1. Turn on your Home Theater System.
2. Press and hold the Open/Close button on the DVD player on the front panel for more than 4 seconds.
Note: Repeating the two steps above turns Dealer Lock on again.
The Dealer Lock feature is mainly used by retailers to ensure that the display discs are not removed. However, parents of young children may find this feature very useful as well.
DVS products Method I
As for a free code of standard DVD player, please follow the procedure with remote control.
1. press subtitle key (or repeat key) in No disc.
2. Press digit key in order (if a digit display on the screen, you must try it from the beginning step.)
if regional code is "2"
> Repeat → 3 8 7 6 7 → 9 (before 2001. Oct.) > Repeat → 5 7 5 3 8 → 9 (after 2001. Nov.)
> if regional code is " 3" > Repeat → 5 6 7 3 2 → 9
> if regional code is "4" > Repeat → 7 6 8 8 4 → 9
> if regional code is "5" > Repeat → 5 3 8 1 4 → 9
> if regional code is "6" > Repeat → 2 4 4 6 2 → 9
5 - 7 - 5 - 3 - 8
3. After pressing digit 8, you can see a digit X (your regional code).
At that time, you have to press a digit 9.
4. press "Subtitle" to confirm it.
5. it's over.
Method II
And as for a portable DVD player, there is a difference compared to the above method.
1. Press "repeat" key in No disc.
2. Press ▲, ▼, ▶, ◀ in order
3. Press "repeat A-B" key.
If regional code display on the screen, press "repeat A-B" key after selecting a number "9".
● type1 :
No Disc - repeat - ▲ - ▼ - ▶ - ▼
at that time, press "▼ " once more.
it will display digit "2" and change a digit whenever "▼ " presses.
you select digit "9" and press "repeat A-B".
● type2 :
No Disc - repeat - ▲ - ▼ - ▶ - ▼
at that time, press "repeat A-B ".
it will be changed from orignal digit to "9".
BLUE TECH Products Method
ENTER>8-4-2-6-9->ENTER…………
in order to reset your DVD player, press "stop" and "play" button at the same time during 5~10 seconds.
if this method doesn't work correctly, press "FF" and "REW" button at the same time during 5~10 seconds.
Solution : How to Playing back an VCD.
>Just delete Location No XD11(1SS355) of Front PCB in status of " POWER OFF"
1) Main u-com reset
> press the STOP button during 7 second in status of standby.
" standby RED LED in the twinkling "
2) MPEG reset.
> Press the STOP button during 7 second in status of " NO DISC"
" initial mode > Auto shut down"
DVD-V6500 SAMSUNG
