السلام عليكم
خلال البحث على صفحات النت وجدت مشروع للتحكم بالموتور عن طريق ريمةت كنترول
ولكن لم افهم الدائره حتى الأن .... ياريت ياجماعه لو سمحتم لو هناك احد يقدر على فهم هذه الدائره فليتفضل بالتوضيح ...
وياريت يتم توضيح رسومات الدائره وتوصيلاتها
المشروع هنا( http://www.electronics-lab.com/proje...023/index.html )
وهذا هو المشروع
Motorized Curtain with Remote control
author: Simeon Kuninski - skuninskigmail.com
Introduction
The project is "Motorized Curtain" with Remote control. It is made up of MCU ATMEGA328 with Arduino BootLoader, motor driver L293D ( i used L293B with external diodes, because i couldn't find L293D ), IR Receiver TSOP 1738, DC Motor from an old printer and other small parts. To control it, i use IR remote control from a PixelView TV Tuner. The software allows moving the curtain from left to right and back, or on steps. On the last peg (of the curtain rail) is attached a small magnet, which interacts with the two reed contacts, placed on the two ends of the rail. The last peg is moved by a cord, which connects it to the motor on one side and a reel to the other.
Source Code is written on Arduino. I use NECIRRcv Libraries for decode code from IR Remote Control.
Schematic
Photos
Video
Motorized curtain with remot control
