إن شاء الله سيكون هذا القسم للسرفس الخاص بكل أنواع LCD

نرجوا من الأخوة عدم الرد بالشكر والمجاملات ونجعل هذه الصفحة للسرفس فقط من عنده معلومة عن سرفس معين لأى جهاز أن يضعها هنا مشكورا فى هذا القسم ونتعاون معا على بركة الله

هذه المعلومات نقلا عن إحدى المواقع الأجنبية ونتمنى المشاركة من الجميع من عنده معلومة معينة عن سرفس معين لأى جهاز أن يضعها هنا

تحياتى للجميع

PHILIPS

Log into the service menu :
# c is rapidly gaining remote 062596i (i- button "info",)
# window appears with a warning in English.
Warning: Access only to employees of service centers.
Unauthorized access may terminate the guarantee of your TV.
# Do you want to go - simply press the Menu button on the remote . Exiting the Menu - click the red button on the remote.
Useful information
1. hours worked . SM -> Operation hours
2. type matrix. SM -> Options -> Display -> Screen
# 062. LCD LPL WX5 SLB1 32 ". LPL - native filipsovskaya matrix. The most desirable option.

TOSHIBA

Log into the service menu :
# Turn on TV and press the MUTE button on the remote . Further MENU on the TV casing and simultaneously MUTE on the remote.
# press the " 9 " once and see the top line on time.
# pressing " 9 " several times looking type of matrix .
# Press the AV input call splash of blue, red and green colors.
Warning: Press "2" do not press in any case ! (reason not specified, but unconfirmed reports included calibration mode, white)
Exit - turn off TV -click " Network. "

SAMSUNG

Log into the service menu :
For all LCD and PDP TV in Europe - a way to enter the Service Menu is universal
When TV is turned off rapidly and continuously press on the remote control keys INFO - MENU - MUTE - POWER
TV less than 25 " sometimes works the American way MUTE - 1 - 8 - 2 - POWER
Log in Service Menu possible only at very high speed pressing all the buttons for 1-2 seconds.
# Move - Enter - enter the submenu , Menu - access to the upper level, up / down - move .
# How to change - think a hundred times , save the settings that were - they are not restored by Reset, left / right - change
Warning: Do not enter the Calibrate and Reset in general, if you do not know why you need it !
# Exit - turn off the TV .
To enter the Advanced Menu - Dial 0000.
Immediately prepare to re- issuing all the custom settings - they will be exposed by default.
# In the engineering menus Panel On Time (Hour) - time between panels.
What can change or adjust in Service Menu?
# Option table is responsible for the overall configuration of the entrance and the telly does not depend on !
# Dimm Type / Type - Information about the matrix .
# Ready responsible for the DTV tuner (OFF - enabled , ON - OFF)
# Shop Mode - enables or disables the magazine mode.
# Adjust - after 2008, hid in the Advanced Menu.
# Video Mute Time - Reduce the value for the quickening of channel switching .

SHARP

Log into the service menu :
# Click on MENU button
# We go to the audio settings .
# Later in the balance
# Rapidly gaining on the remote control -> 0532
# TV dolzhekn go to sevisny mode.
# To exit the SM press the " network " on the remote.

2nd version of the entrance to the service menu :
# TV must be switched off.
# Press and hold the "VOLUME -" and "MENU" on the TV and turn it on the button "ON / OFF".
Button "VOLUME -" and "MENU" do not let until TV lights up the screen. In the upper left corner should be lighted sign.
# Press the buttons simultaneously "PR-" and "MENU".
# Further navigation panel.
To exit the service menu to turn off the TV button "ON / OFF" on the TV.
# Press and hold the "VOLUME -" and "MENU" on the TV switch on the TV button "ON / OFF".
Button "VOLUME -" and "MENU" do not let until TV lights up the screen.

The third version of the entrance to the service menu :
# Turn off the TV button "Power"
# Push the TV button, "Vol -" and "INPUT"
# Hold them turn on the TV . In the left corner appear bukvochki .
To exit the service menu to turn off the TV button "ON / OFF" on the TV.
# Press and hold the "VOLUME -" and "INPUT" on the TV switch on the TV button "ON / OFF".
Button "VOLUME -" and "INPUT" not to let TV do not shine until the screen.

Login Factory Service Mode: BenQ Lcd Monitor



a) The Older and latest version of BenQ LCD Monitor have diference method
to login factory service mode. The older version login method is: Press and hold the "MENU" & EXIT" button, then press "POWER" button to on the lcd monitor.



b) After on lcd monitor, you need to press "i" button, now you can login to their factory service mode.



c) We can look at the above photo, the early or older benq lcd monitor, they only have a little information on it. They just show the white balance functinon on factory service mode for adjustment only.



d) The new model of BenQ lcd monitor, their login factory service mode method are difference from the early model lcd monitor. Firstly, press The "POWER", "SELECT" and "MENU" button at the same time.
After on lcd monitor, press the "v" button, now you can login to the factory service mode.



e) The above photo is factory service mode for BenQ FP241WZ lcd monitor. Bottom of the photo have show out their manufacturer time and lcd panel part number.

Plasma / LCD / CRT / RPTV :

# Using the remote control:
# Turn the TV off.
# Press {DISPLAY} {5} {VOL+} {POWER ON} buttons.
or
Press {DISPLAY} {5} {POWER ON} buttons.
# The Service Menu will be displayed.
# Use numbers {1} and {4} to select the item to adjust.
# Use numbers {3} and {6} to adjust the value of the data.
# Press {MUTE} then {ENTER} to save new settings.
# The words "WRITE" in red will show up in the upper right corner if saved.
# Turn the TV off to exit the service menu.


PROJECTORS :

* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Service mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Then {UP ARROW} when it asks: "Do you want to enter the Factory Mode?".
* Any additional menus usually pop up under the main INFORMATION menu.


Service Menu Key Sequence:

* Access "Menu" and make sure "Status" is On.
* Exit the "Menu".

* Service Menu :
* Using the remote control
* Press {ENTER} {ENTER} {UP ARROW} {DOWN ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Service Mode?".

* Factory Mode :
* Using the remote control
* Press {ENTER} {ENTER} {LEFT ARROW} {ENTER}.
* Select "Yes" when it asks: "Do you want to enter the Factory Mode

a) Before on lcd monitor, press and hold the "2" button then on the lcd monitor power.



b) After on lcd monitor, press "1" to open the osd menu.



c) Now, you can see bottom of the menu extra more one selection for "Factory Menu".



d) Press the "2" button, you can login to the factory service mode.


e) The information of Viewsonic LCD Monitor factory service mode.


وللحديث بقية

اخوكم / فادي آل دويك
ACTGSM TEAM

LG Lcd Monitor

Before on the lcd monitor, you need to press and hold the "MENU" button, then press "POWER" to on the monitor. Press "MENU" button to open the osd menu, at the bottom of menu, you can see a new selection to go into the factory service mode.



a) Press and hold the "MENU" button, then on the monitor.



b) Now you need to press the "MENU" button, then you can login to factory service mode.



c) The LG LCD Monitor factory service mode screen shot. Inside the factory service mode, you got some useful information like, product model, manufacturer date, F-ENGINE chipset version, lcd panel number and etc.


إن شاء الله لما الاقي كمان هاجيب
هو احنا عندنا اعز منكم ؟!

sony bravia