How to update the software-طريقة إعطاء السوفت وير /البرامج المستخدمة

المهندس عمرو · 27-11-2010, 10:30 PM

الأخوة الأعزاء كان الوالد كان يجهز هذا الموضوع وتم ترجمته إلى الإنجليزية نقلا عن المواقع الروسية وبعض الأصدقاء الأجانب وإن شاء الله سيكون شامل للمبتدأ والمحترف وهدية لكل مشرفى القرية الشرفاء أصحاب المبادى وأيضا إلى كل مهندسى القسم العظماء الذى أطمع بالمشاركة معهم فى الدخول والشرح لبعض البرامج المستخدمة فى هذا الموضوع xxxxx

نبدأ على بركة الله

حرر بواسطة Fahad

المهندس عمرو · 27-11-2010, 10:32 PM

How to update the software, the scheme links the program

In devices assembled on processors MStar an 8-pin ISP FLASH. Many programmers support it, but then the question arises vypayke her search for the panels, or napaivaniya wires. I want to share with you, dear users of the portal, the method of in-system programming (as well as reading) ISP FLASH. this will require a program or ISP TOOL ISP Writer (same), a simple jig for 74HC05 (approximate shemku attached), and a little patience. I use a jig kindly provided by PANASONIC, called Singie Master IIC-INTERFACE. Familiar used samsungovsky MTI-2059, also worked. Usually on a special apparatus. connector for programming, and when you receive the unit I am assembling a small perehodnichek from my jigs to this unit and each sign, in order not to be distracted by desoldering. the only drawback of my jig is that it must be powered, as program does not provide recharge to the LPT (although it is possible that the jig is not soldered).
Begin work needed from the tab Config, it selected the port settings. there need to configure the port pins under the jig (under my approach configuration AOC. For another, the jig may have to configure the pins by hand. After that we press the button Apply. Then you can validate the configuration of pins Auto Detect button should appear next to the word OK.
After we press Connect and the program (when properly connected and configured) shows a window with a specific type of Flash.
To read choose a bookmark LOAD (not READ), choose the path (the button Load) and we press on the RUN. To select the recording tab READ. In her chosen path (Book Read) and go to the tab AUTO. It is we press on the RUN. Begins the process of programming at the end of it appears PASS. Well, sort of, and all he wanted to say, if they have questions, please ask here, I hope the moderators do not outsource topic.
That such differences.
But still, I forgot, you can use instead of the 74HC05 its Russian analogue K555LN2.

المهندس عمرو · 11:08 PM

Estimated shemka dzhiga.jpg

isp_tool.rar

changing the potential from the log. 0 on the log. 1, in this processor, he succeeded zakonektit it.

Continuing the theme MICRONAS
Program Visual I2C allows both write and read the firmware.
Here is a description of plum proshivy:
1.Proizvesti standard connection TV, computer with JIG.
2.Otkryt program Visual I2C. Double-click on Add Watch

3. Line Name specify the path and name for the driver that saves.
4. In paragraphs Address must be set
From 0x0
To to flash 256K-0h3ffff
to flash 512K-0h7ffff
for firmware 1M-0xfffff
5. Unveiling the Watch select Save Bin (can be in HEX, but as it has already agreed to maintain BIN)
6. Then click the OK button. In the program a button Save Flash-BIN. we press on it, begins the process of draining the firmware.
7. For each sink must specify the path and name of the firmware, otherwise it will be rewritten merged before.

With regard to - MtkTool !!!!!!!!
Reads and writes with a 3 meter COM-Extension, without entering the service!!
Version-mtktool_2_1_.42.12_202, is that the Chinese (on the forum it is).

mtktool_2_1_.42.12_202.rar

المهندس عمرو · 27-11-2010, 10:47 PM

Continuing the theme spread seal jig on the 74HC05. Handkerchief excellent climbs into the body of LPT port.
M / s. soldered by the assembly, made for that, would later replace it with a SMD package.

Signet jig on the 74HC05 LAYOUT.rar

المهندس عمرو · 27-11-2010, 10:49 PM

Processors firm WINBOND (W79E632, etc.) also have in their composition ISP FLASH. Flash is built into the processor, but as far as I know it can be assumed to record it the programmer, but not all programmers support them. They are programmed using a free utility ISP Writer. The documentation on it in detail the programming procedure and necessary for its execution hardware. Utility-oriented work under Windows operating system and allows to reprogram a microcontroller via RS-232 interface using a simple adapter based driver interface MAX232. The only drawback is that it is necessary to translate the programming processor mode DEBUG (ISP) (such as TVs, BBK, collected on this processor, you must hold down --/-, if the device enters programming mode. In other devices directed to the DEBUG I unfortunately do not know.
Here you can take shemku jig:
http://personal.inet.fi/cool/mediatek/programs/mtktool.html
Here an overview of the entire family of chips:
http://monitor.net.ru/forum/schematics-programm-info-262920.html

Here are faced with Processor SM5964 firm SyncMos. As well as processors WINBOND have inside the memory, a program and a description can be found here http://www.syncmos.com.tw/technical.php?language=english&pid=2. Unfortunately prog does not save the firmware, but in stitching machine had nothing to and the entrance to the ISP mode, I did not know (MINI LCD MXJVC kk-845). If someone disposes of information on their programming spread.

المهندس عمرو · 27-11-2010, 10:50 PM

PROGRAM WinHost_V32A there is a significant drawback, there is no backup, and without it there is no value in the prog, you know we have with you in the form of firmware, firmware is not, and zaimet they can only discharge by using a joint rabotu.Da even if the security bit is set, then access to write in the flash will be erased only if the MCU, and even if the program will be a backup, but it will be worth bit of protection, too, is not and merge! Booth there hardveyny and software!

But the program itself

IRFWX-A017_C_SyncMOS ISP APN V3.2 (English). Pdf

WinHost_V32A setup.part1.rar

WinHost_V32A setup.part2.rar

WinHost_V32A setup.part3.rar

WinHost_V32A setup.part4.rar

المهندس عمرو · 27-11-2010, 10:52 PM

Program for XORO

STK601xISP.rar
I2C_LPT.rar

LARTER, the situation with WINBOND next in the program provided you are no binary files needed for raboty.Eto loaders in flash memory size of 4kb LD, after the processor is transferred to the mode H / W (Boot mode) to work
from the top of the flash memory to be written into the sector LD (flash size 4kb) loader predostavlyaetsya as a binary file
whose name LDUXXXX, XXXX depends on versii.V latest version of 40910, there is no backup function, so that few of her prosecutors, attach 1,08.001 version, but instead there is the so-called ld demo.bin, so that the version 1.08.001 8051 isp writer needed LDU40325.bin

Ldu versions depending on the version of ISP WRITER.
Winbond 78E65 8051 IspWriter ver 1.08.001.rar
Winbond ISP Version.rar

المهندس عمرو · 27-11-2010, 11:11 PM

Processors firm "TOPPO" TP2808 also have in their composition ISP FLASH. Flash is built into the processor, but as far as I know it can be assumed to record it the programmer, but not all programmers support them. They are programmed using a free utility TP280XISPv5. The documentation on it in detail the programming procedure and necessary for its execution hardware. Utility-oriented work under Windows operating system and allows to reprogram a microcontroller via RS-232 interface using a simple adapter based driver interface MAX232 (I offer apologies for the copied text LARTER)
The processor architecture is similar to WINBOND (W79E632, etc.)
Log in ISP mode is described in Datasheet
Got a TV with murdered Flash here that I found on this subject
To flash the firmware as well as to have two files WINBOND
where to get them unfortunately do not know.

MAX232ACPE.rar

Signet is. Need to turn the mirror when you print

MICRONAS.rar

I opened the package Ward in 2007 if the document is created in it, the old version of Ward can not open a file. Perekonventiroval in pdf –
PORTMSC.pdf

I decided to continue to deal with the possibility schitovaniya flash.
In describing HELP ISP has a team of schitovaniyu.
Podkorektirovav boot fail, I was able to merge.
but I don `t know fit this HEX fail as a flash, because a large volume of silno 22MB.
When you set the team FLASHRead need to ask at what address to start
and a volume of downloads. Trial, I asked to address 00000 and volume 9999999.
It would be nice if Larter, looked to this file.
Only he's a big, where would unload it?

sisp_le.txt

XJDemo Hardware